Time spent identifying your property and securing yourcar is time well spent. The following anti-theft devices are currently available to help you secure your car:
An engine immobiliser is an electronic device that acts to isolate the ignition system, the fuel system, the starter engine, or a combination of these three systems. As most new vehicles control these systems via the engine management system, immobilisers on newer vehicles tend to interface with this component. The immobiliser will not allow the vehicle to be started without first receiving the correct signal from the person starting the vehicle. This signal can be communicated to the immobiliser unit in a number of ways. Read More...
If your automobile has every decent sort of fuel/spark ECU (Electronic Control Unit), it must already have a relay, as the energy from the ECU is also low to power the pump directly. If you have a carburetor automobile, fit a relay close to the pump. Read More...
If the "Alarm Fault" communication is displayed on the Message Center, the most possible cause is failure of the ultrasonic sensor module mounted on the headliner. This device monitors the inner of the automobile for intruders when the automobile is in the "superlocked" state. Alternate of the sensor is easy and, if you are lucky, will solve the problem. Read More...
Auto-glass etches are the valuable automobile theft prevention device. Stolen vehicles are taken to chop shops where they are uncovered for their parts. The look of auto-glass etches robotically makes the parts empty because they can be simply traced, thus making these vehicles cost prohibitive for possible thieves. Read More...
Steering wheel locks are visible from outside the car and avoid the wheel from being turned more than a few directions. A difference on the steering wheel lock is the J-bar or grip lock, a flexible steel bar rod that hooks under the brake and locks to the steering wheel. Read More...
In an anti-theft hand brake arrangement for a motor vehicle having a ratchet free mechanism operable by a push button, exposed at the end of a handbrake lever, the push-button incorporates a cylinder lock. In the locked condition, the push-button may still be depressed, but without acting on the ratchet release mechanism, while in the unlocked condition an abutment member at the inner end of the push-button is so situated as to engage a release member of the ratchet free mechanism when the push-button is depressed, thereby to release the brake ratchet. Read More...
Wheel locks prevent theft by making it very hard. Although not possible to steal a set of wheels along with the tires. They work like usual lug nuts except that wheel locks can only be removed using the wheel-lock key a specially formed socket which you carry in the trunk. Read More...
Auto Thief Game is the Popular Game. It is the way to Analyse Thieft attacks ,
Ultrasonic Motion Sensor
Wheel Lock
Engine Immobiliser
Glass Etching on Motor Vehicle
Steering Wheel Lock
Steering Lock
Engine Immobiliser
Electronic-tracking-device
